DINITROL 482 Underbody Protection

is a black (UBS) underbody protection product based on bitumen (asphalt) and wax. It is particularly suitable for treating the underbodies of used vehicles. Apply the material using so-called differentiated spraying, where you apply a significantly thicker layer to the leading edges and exposed areas of the underbody, while areas protected by cover plastics and trailing edges can be treated with a thinner layer. You can find the approximate material consumption depending on the vehicle type in the consumption table.

Application Method

DINITROL 482 is applied either with a manual UBS HR gun or a high-pressure pump 1:26. Before using DINITROL 482, the surfaces to be treated should be thoroughly cleaned to remove dirt, oil, and old, loose paint that is already peeling from the underbody. The texture and thickness of the surface can be influenced by changing the air pressure and spraying distance. If a smooth surface is desired, the material can be diluted with low-aromatic solvent (white spirit). Apply the material using so-called differentiated spraying, where you apply a significantly thicker layer to the leading edges and exposed areas of the underbody, while areas protected by cover plastics and trailing edges can be treated with a thinner layer. Safety Data Sheet DINITROL 482

Safety Information (CLP)

Signal word: Danger

Hazard classification:
Flam. Liq. 2
STOT SE 3
Aquatic Chronic 2

Hazard statements:
H225 Highly flammable liquid and vapor.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long-lasting effects.

Precautionary statements:
P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
P243 Take precautionary measures against static discharge.
P280 Wear protective gloves/protective eyewear/face protection.
P303+P361+P353 IF ON SKIN (or hair): Remove all contaminated clothing. Rinse skin immediately with water or shower.
P403+P235 Store in a well-ventilated place. Keep cool.