DINITROL 81 creates a strong transparent matte film

It features excellent protective properties against corrosion. Suitable for both painted and unpainted surfaces, ferrous and non-ferrous metals. An ideal solution as a protective coating for the underbodies of historic vehicles, as it is not visible and does not attract dust. If necessary, it can be removed with aromatic solvent (white spirit, alcohols).

DINITROL 81 is suitable

also for protecting underbody parts from salt. Ideal for protecting shock absorbers, steering joints, suspension arms, electrical components of axles and underbody. It is also an excellent form of protection for more expensive vehicles that have a large part of the underbody covered, but under protective shields, salt water can cause significant damage.

Features:

• creates a strong transparent matte wax film

• extremely resistant to salt water (SST resistance up to 1000hrs in salt spray chamber at 50μm thickness)

• flexible in frost

• fast drying (30min)

• non-sticky

• renewable without the need to remove the original coating

• adhesion to all types of surfaces

• excellently protects rubber seals

Based on:

• modified waxes

Use:

• underbody parts, painted components, non-ferrous metals, vintage cars

Preservation of vintage cars in original condition (patina):

• excellently protects parts with damaged coating from further corrosion

• creates a thin, non-sticky protective layer that is mechanically resistant

• if you decide to renovate, simply remove it with white spirit

• for areas affected by corrosion, we recommend first using clear corrosion stabilizer DINITROL RC900

Safety information (CLP)

Signal word: Danger

Hazard classification:
Aerosol 1
STOT SE 3
Aquatic Chronic 3

Warning statements:
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long-lasting effects.

Safety recommendations:
P210 Keep away from heat, hot surfaces, sparks, and open flames. Do not smoke.
P251 Do not pierce or burn, even after use.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P410+P412 Protect from sunlight. Do not expose to temperatures above 50 °C.