ELTA Voltage Converter 24V/230V SP600-24V

Usage:

For powering portable computers, radios, small TVs, video, lights, fans, etc.

Specifications:

• Input voltage: 10-15V DC
• Input full current load: 30A
• Standby input current: less than 0.5A
• Output voltage: AC: 230V +/- 5%, modified sine wave
• Output frequency: 50Hz
• Continuous power: 600W
• Peak, short-term power: 1200W
• Efficiency: 90%
• Automatic shutdown at supply voltage drop: 10 +/- 0.5V DC
• Indication at supply voltage drop: 10.5 +/- 0.5V DC
• Thermal protection: 60 +/- 5 deg C
• Short circuit protection: yes
• Overload protection: yes
• Protection against 12/24V power supply mix-up - yes
• Power supply polarity protection (battery) - yes by fuse
• Fuse: 35A - 1 pc
• Dimensions: 65x245x175mm
• Weight: 1.78 kg

If the inverter is not working properly, there may be several reasons:

• poor contact - clean the contacts
• Inverter has no power - check the fuses in the vehicle or check the supply wires
• Fuse is blown - replace the fuse with an equivalent one
• At higher load, a drop in output voltage occurs - reduce the load below 150W
• Temperature may cause a reduction in output voltage
  • 1, turn off the main switch
  • 2, disconnect some appliances or wait until the inverter cools down, turn on the main switch

Shutdown at reduced battery voltage - charge your battery.

Warnings:

Always place the inverter in a location that:

-is sufficiently ventilated -is not exposed to direct sunlight or a heat source -out of reach of children -away from water, moisture, oil, grease -away from explosive and flammable items