Finishing Polish with Wax 250ml Power Protect Ultra 2in1 Menzerna

Finishing polish for removing holograms (third step - finish) and preserving the paint with a protective film in one step.
Universal finishing polish - combines the third and fourth steps (finish and protection) into one. Removes the last holograms and leaves a highly glossy and smooth surface protected by a preservative layer.

Polish capability level:
Paint cutting/grinding: 2 / 10
Final gloss: 10 / 10

Tools and accessories:
Polisher:
The polish can also be used with a rotary, orbital/dual-action polisher. We recommend using an orbital/dual-action polisher. With a rotary polisher, use a speed of 800-1200 RPM.

Pads:
For applying Menzerna Power Protect Ultra 2in1 you can use:
-soft foam pad
-ultra-soft pad

Usage:
1. Before polishing, thoroughly clean the surface/bodywork/vehicle. Decontamination of the paint is also recommended before polishing.
2. If you need to remove holograms, use a soft foam pad. If you do not need to remove holograms, use the ultra-soft foam pad.
3. First shake the container and then apply to the pad. Depending on the pad size, apply 3-4 drops approximately the size of a pea. After applying to the pad, first spread the polish manually, with the polisher turned off, over an area of about 80x80cm. Then you can turn on the polisher and start polishing, initially with only light pressure on the polisher.
4. After polishing is complete, let it dry for 5-10 minutes and remove the residue with a microfiber cloth (without pressure).

Contents: 250ml