FLEX Cut-Politur PC-C - Coarse Polishing Compound 250ml

FLEX Cut-Politur represents the technological pinnacle in the field of mechanical renovation of painted surfaces. This highly abrasive compound was developed specifically for professional use, where uncompromising performance is required for removing the toughest defects.

Professional Paint Renovation in Record Time

Forget about tedious multi-stage sanding. This compound is designed to handle sanding marks from sandpaper with a grit up to P1500. It is the ideal solution for heavily weathered paints that have lost their original gloss due to oxidation, UV radiation, or aggressive chemicals.

Key Features and Technical Advantages:

• Aggressive Material Removal: Thanks to precisely calibrated abrasive particles, the compound immediately "bites" into the surface and removes scratches, not just masks them.

• Optimized Cooling: Special lubricants in the composition prevent surface overheating during work, thereby reducing the risk of paint damage even during prolonged polishing of one section.

• Silicone-Free: The product is fully suitable for paint shops and professional detailing studios. It leaves no residue after application that would hinder the subsequent application of waxes, sealants, or ceramic coatings.

• Easy Wipe-Off: After completing the polishing cycle, compound residue can be easily wiped off with a microfiber cloth without the need for scrubbing, minimizing the risk of new micro-scratches.

Who is this product for?

1. Detailing Studios: As the first step in paint correction to achieve a perfectly smooth surface.

2. Used Car Dealerships: For quick paint revitalization of used vehicles and increasing their resale value.

3. Paint Shops: For removing dust and "orange peel" after fresh painting.

Recommended Application Procedure:

To achieve maximum effect, we recommend using a rotary or dual-action polisher in combination with a firm polishing pad (e.g., a red FLEX foam pad or wool pad).

1. Thoroughly wash and decontaminate the surface.

2. Apply 3-4 drops of compound to the pad.

3. Spread the compound at low speed over an area of approx. 40x40 cm.

4. Increase the speed and work with light pressure in a cross-hatch pattern until the compound becomes almost transparent.

5. Wipe off residue with a clean microfiber cloth.

Technical Parameters:

• Abrasiveness (Cut): 3/5 (High)

• Gloss Level (Gloss): 5/10

• Volume: 250 ml / 1000 ml

• Suitability: All types of paint (including hard ceramic paints)