FLEX PC-M 250: The Mastery of One-Step Polishing in German Quality

FLEX PC-M 250 represents a top-tier medium abrasive polishing compound (Medium Cut) that defines new standards in the efficiency of renovating painted surfaces. It is designed for detailers and painters who seek an uncompromising balance between cutting power and the resulting finish.

Technological Profile

The heart of the compound is intelligent, micro-fracturing abrasive particles. At the start of polishing, they act aggressively enough to eliminate defects, but under the influence of pressure and heat, they gradually break down into fine particles that polish the surface to a deep, crystal-clear shine. This process makes FLEX PC-M an ideal candidate for one-step correction (1-Step).

Main Characteristics and Areas of Application

• Cutting Potential: The compound easily removes sanding marks from P2000 grit sandpaper. It effectively eliminates light to medium-deep scratches, paint oxidation, and holograms from previous aggressive steps.

• Versatility: It is fully compatible with rotary and dual-action (DA) polishers. It achieves the best results when paired with a medium polishing pad or a wool pad for harder paints.

• Clean Operation: Thanks to a special formula, dust creation is minimized to zero. This not only saves time during subsequent car cleaning but also protects the worker's health and keeps the work environment clean.

Usage Instructions:

1. Thoroughly wash and decontaminate the surface.

2. Apply the compound to a suitable pad (we recommend an orange or medium-hard FLEX pad).

3. Polish at medium speed with light pressure until the compound turns into an almost transparent film.

4. Wipe off the residue with a clean microfiber towel and inspect the result under inspection lighting.

Volume: 250 ml

Cutting Power: 5/10

Gloss Level: 8/10